


Moderators: Trooper, Tiki the Boyler
fali samo neki besplatni artist blowjob da mi pokloneDear Vuk,
2011 is over, and even if it was a difficult year, we managed to create even better instruments. Here are some things we made in 2011:
*All the Warwick basses have already since 3 months (but we did not announce it officially and you probably even did not noticed it) illuminated fluorescent dots - Glow-in-the-dark side dots.
*Since september, all Warwick basses now come with an improved method for pickup mounting. all Warwick bass models that are manufactured in the Markneukirchen factory utilize the “non plus ultra“ version with threaded brass screw anchors along fitting drill holes that warrant a perfect pickup mount.
*We bought one year ago a unique CNC machine for our necks, it took us one year to make the program of all the neck versions. Due to this new CNC, we developped a unique :
"Invisible Fret Technology" IFT ™
this allows for guitar frets to be laid without compromising its structural integrity. As a result, IFT™ creates better neck stabilization and avoids the dreaded “fret poke” which sometimes occurs when fret slots are cut through a fret board and frets are installed in the traditional manner.
IFT™ also allows for the fretboard to be sanded to the correct radius and the actual fret to be crowned to a perfect profile. Ultimately, IFT™ allows for the best neck and fret possible with a straight and stable, a perfectly fit, smooth fret. An overall better feel for better playing.
Finally we invested and built a complete new UV laquering room which give our customers the best, the strongest and the finest laquering technology.
"The New Ultra-Thin natural UV Laquering, Water based Technology"
There have been great advances in the field of lacquering over the past few years. Framus & Warwick’s own intensive in-house research has paid off. The results are unique, ultra-thin coatings, which provide qualities similar to the legendary nitrocellulose lacquers while not being as unhealthy and ecologically harmful. These finishes are second to none visually.
During our research process, extraordinary know-how and dedication has led to constant innovative improvements. Stress tests have shown that our state-of-the-art lacquers even exceed the resistivity standards set by the automobile industry.
All instruments are finished with a water-based UV lacquer which is as scratch resistant as any acrylic lacquer due to its nano particles. The nano-lacquer contains only 10- 40% toxic solvents as compared with 80-90% of usual lacquers. The lacquer dries within 30 seconds in a specially designed UV chamber in a near 100% nitrogen atmosphere.
They say the best bass in the world is the one that has a gig every night. We wish you many gigs with your Warwick bass, and a 2012 with good health and prosperity
Don't forget, in 2012 we are celebrating the 30th anniversary!!!
Your Warwick Forum Friend,
Florin Barbu
Users browsing this forum: No registered users and 1 guest